Purolite MB400 DI granulat til rentvand

Producent: timesolution
Type: vandføringssystem
Antal
Priser vises med moms

Purolite company logo

Purolite MB400 er en højkvalitets deioniserings granulat mix til fremstilling af deioniseret / ionbyttet / demineraliseet vand.

Til fremstilling af deioniseret / ionbyttet vand.

Godt produkt til vinduespudsning da Purolite leverer < 0.1 microsediment/cm

Leveres i 25 liter poser til genpåfyldning af tanke og rør.



MB-400

Klar til brug mixet granulat

Teknisk data
Produkt beskrivelse


MB-400

is a fully-regenerated mixture of strong acid cation resin (C100H) in the H form with a type 1 strong-base anion resin (A400OH) in the OH form. It is ready for use after a short rinse to drain and can achieve very high quality demineralised water.

Applications:

This resin is primarily used in two roles for the production of high quality demineralised water. While it is suitable for use in regenerable or non-regenerable cartridges and in large ion exchange units, it is primarily used in the non-regenerated throw-away mixed bed market.

It can be used either in small applications to directly treat incoming raw waters to produce a good-quality demineralised water or in a polishing application after other ion exchange and / or reverse osmosis plant to produce water of even higher quality.
Polishing of good-quality water under recommended operating conditions can see the resin as supplied achieve almost complete reduction of total dissolved solids. The residuals produce average conductivity values of about 0.1 s cm-1 for a major portion of the service run, which may be extended depending upon the final water quality acceptable.



 

Typical Chemical and Physical Characteristics
Polymer Structure Gel polystyrene cross-linked with divinylbenzene
Appearance Spherical beads
Functional Groups Sulphonic acid and quaternary ammonium
Ionic Form – as shipped Hydrogen – H+, Hydroxide – OH-
Shipping Weight 705-740 kg/m3 (44-46 lb/ft3)
Screen Size Range (U.S. Standard Screen) 16-50 mesh wet
Particle Size Range (microns) +1200 < 5%, -300 < 1%
Moisture Retention – as shipped 65% max
Total Exchange Capacity
Cation component (Na+ form) 1.9 eq/l min
Anion component (Cl- form) 1.3 eq/l min
Percentage by volume
Cation component 40
Anion component 60
Temperature Limit
Non-regenerative bed 100° C (212° F)
Regenerative bed 60° C (140° F)
pH Limits None
Notes
This resin mixture is manufactured with a very high percentage conversion to the hydrogen and hydroxide forms. Exposure to the atmosphere for more than half an hour can result in uptake of substantial quantities of carbon dioxide which can affect the performance of this product. Hence, bags should be opened shortly before use and unused bags re-sealed carefully. This product should not be left in direct sunlight.

Pure deionised water of the quality obtainable from MB-400 has uses in many applications and industries. A few of these are included in the following list: in chemical and photographic laboratories, for water conditioning for steam irons, for topping up car batteries, for stain prevention in glazing industry, in the cleaning of glassware in catering and licensed trade, as well as the EDM market

Water may be passed either intermittently or continuously at flow rates up to 40 bed volumes per hour, depending upon the total dissolved solids of the water to be treated. Where use is intermittent, the provision of a recycle system will ensure that the treated water quality is the best possible. Alternatively, after a period of shutdown, the first water obtained when starting up can be discarded until the quality is satisfactory.

 


Lagerstatus – Lagervare

Leveringstid – 1-2 dage

25 liter tank til DI granulat